Sandvik Coromant SANC 40577
Sandvik Coromant 5963282 CoroMill Plura Ball Nose End Mill, 0.031 in Dia Cutter, 0.019 in Length of Cut, 2 Flutes, 0.157 in Dia Shank, 1.771 in OAL, PVD Coated
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill Plura, 0.031 in Diameter Cutter, 1.771 in Overall Length, 0.019 in Length of Cut, 2 Flutes, 0.157 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.42-00830-FC08G 1700, ISO Code: R216.42-00830-FC08G 1700, Solid Carbide, PVD Coated
Features
- 1700 manufacturer grade
- 0.77 mm Dia body
- 0 deg body half taper
- Straight chip breaker
- 2.4 mm L body
- 1 cutting length
- Without coolant entry
- No coolant exit
- 0.77 mm Dia neck
- SFW (EFW) feed direction
Specifications
ApplicationPre-Machining and Finishing
ANSI CodeR216.42-00830-FC08G 1700
Cutter Diameter0.031 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeR216.42-00830-FC08G 1700
Length of Cut0.019 in
MaterialSolid Carbide
Number of Flutes2
Overall Length1.771 in
SeriesCoroMill Plura
Shank Diameter0.157 in
Shank TypeCylindrical
TypeBall Nose