Sandvik Coromant SANC 40561
Sandvik Coromant 5963272 CoroMill Plura Ball Nose End Mill, 0.019 in Dia Cutter, 0.013 in Length of Cut, 2 Flutes, 0.157 in Dia Shank, 1.771 in OAL, PVD Coated
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill Plura, 0.019 in Diameter Cutter, 1.771 in Overall Length, 0.013 in Length of Cut, 2 Flutes, 0.157 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.42-00530-EC05G 1700, ISO Code: R216.42-00530-EC05G 1700, Solid Carbide, PVD Coated
Features
- 1700 manufacturer grade
- 0.47 mm Dia body
- 0 deg body half taper
- Straight chip breaker
- 0.75 mm L body
- 1 cutting length
- Without coolant entry
- No coolant exit
- 0.47 mm Dia neck
- SFW (EFW) feed direction
Specifications
ApplicationPre-Machining and Finishing
ANSI CodeR216.42-00530-EC05G 1700
Cutter Diameter0.019 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeR216.42-00530-EC05G 1700
Length of Cut0.013 in
MaterialSolid Carbide
Number of Flutes2
Overall Length1.771 in
SeriesCoroMill Plura
Shank Diameter0.157 in
Shank TypeCylindrical
TypeBall Nose