Sandvik Coromant SANC 19439
Sandvik Coromant 5743417 CoroMill Plura Ball Nose End Mill, 0.059 in Dia Cutter, 0.059 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 2.244 in OAL, PVD Coated
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill Plura, 0.059 in Diameter Cutter, 2.244 in Overall Length, 0.059 in Length of Cut, 2 Flutes, 0.236 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.42-01530-AI15G 1610, ISO Code: R216.42-01530-AI15G 1610, Solid Carbide, PVD Coated
Features
- 1610 manufacturer grade
- 1.5 mm Dia body
- 4 - 30 deg body half taper
- Straight chip breaker
- 1.05 mm Dia core at face
- 17.9 mm L body
- 1 cutting length
- Without coolant entry
- No coolant exit
- SFW (EFW) feed direction
Specifications
ApplicationPre-Machining and Finishing
ANSI CodeR216.42-01530-AI15G 1610
Cutter Diameter0.059 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeR216.42-01530-AI15G 1610
Length of Cut0.059 in
MaterialSolid Carbide
Number of Flutes2
Overall Length2.244 in
SeriesCoroMill Plura
Shank Diameter0.236 in
Shank TypeCylindrical
TypeBall Nose