Simpson Strong-Tie SIMS AT30

Simpson Strong-Tie Strong-Rod Acrylic Adhesive, Series: AT Series, Side-By-Side Cartridge Container, 30 oz Container, Acrylic Glass Base, Composition: Resin White Side)CrystalLine Silica, Quartz, Methyl Methacrylate Monomer, 2-Propenoic Acid, 2-Methyl-1,6-Hexanediyl Ester, Tripropyleide Glycol Diacrylate, (Initiator Black Side)- CrystalLine Silica, Quartz, Dibenzoyl Peroxide, Diisobutyl Phthalate, Liquid/Paste Form, 24 hr at 0 deg F, 1 hr at 60 deg F Curing, Black/White, Strong Acrid Odor/Scent, 1.38 Specific Gravity, >73/203 deg F Flash Point, 5.9/5.3 pH, 25 g/L VOC, Applicable Materials: Grouted/Hollow Grouted Concrete Block, Concrete, Masonry and Unreinforced (URM) Brick

• Features

• Non-sag gel formulation ideal for horizontal, vertical and overhead applications
• Easy hole cleaning procedure no power-brushing required
• When properly mixed, adhesive will be a uniform gray color
• Threaded rod anchoring and rebar doweling into concrete, masonry and URM (red brick)
• Multiple dot listings
• For best results store between 32 to 80 deg F
• Surfaces to receive adhesive must be clean
• Base material temperature must be 0 deg F or above at the time of installation
• Information on installations below 0 deg F
• Mixed material in nozzle can harden in 5 to 7 min at temperatures of 70 deg F and above

Specifications

Additional Information

Documents

• Sds