(0 items)
Power Team SPX PE604PT
Power Team PE604PT Portable Post Tensioning Electric Hydraulic Pump, 1-1/8 hp, 2 Stages, 157 cu-in Reservoir, 56 cu-in/min Flow Rate, 0 to 10000 psi Pressure
Factory Order
Power Team Electric Hydraulic Pump, Portable Post Tensioning, Series: PE60, 2 Stage, 157 cu-in Reservoir, 1-1/8 hp, 56 cu-in/min Flow Rate, 0 to 10000 psi Pressure, 115 VAC, 25 A, 50/60 Hz Frequency, 3/8 in FNPT Pressure Port, 12000 rpm Speed, 15 in Overall Length, 9.31 in Overall Width, 18-1/4 in Overall Height
Features
- Long, trouble free life in the most demanding work environments
- For operating single or double acting cylinders or stressing jacks
- Powered by 1-1/8 hp, 115 volt, 60/50 Hz (0.84 kW, 220 V, 60/50 Hz) single phase motor, starts under load, even at the reduced voltages at construction sites
- Insulated carrying handle
- Integral 4 in (102 mm) diameter fluid-filled pressure gauge with steel bezel complies with ASME B40.1 grade A
- 0 to 10000 psi (0 to 700 bar) pressure range in 100 psi (7 bar) increments
- Sealed 3/4 gal 4.34 L (usable) reservoir
- Reservoir drain port is standard
- Standard oil level sight gauge for accurate oil level monitoring
- External spin-on filter removes contaminants from circulating oil to maximize pump, valve and cylinder/tool life
Specifications
Amperage Rating25 A
Flow Rate56 cu-in/min
Frequency Rating50/60 Hz
Horsepower1-1/8 hp
Number of Stages2
Overall Height18-1/4 in
Overall Length15 in
Overall Width9.31 in
Pressure Port3/8 in FNPT
Pressure Rating0 to 10000 psi
Reservoir Capacity157 cu-in
SeriesPE60
Speed12000 rpm
TypePortable Post Tensioning
Voltage Rating115 VAC
Specification Sheet
