GARR GARR 50208
GARR V4R 1/4.01 Center Cutting High Performance Single End End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, AlCrN Coated
GARR End Mill, Center Cutting High Performance Single End, Series: V4R, 1/4 in Cutter Dia, 0.015 in Corner Radius, 2-1/2 in Overall Length, 3/4 in Length of Cut, 4 Flutes, Spiral Flute, 1/4 in Shank Dia, Right Hand Cutting, Plain Shank, Submicron Grain Solid Carbide, AlCrN Coated
Features
- Special edge prep enhances tool life by 20%
- Minimizes burr on part
- Helix geometry varies over length of flutes
- Variable flute design helps with chip evacuation in slots and pockets
- Variable rake aids in chip formation
- PCT (polish carbide treatment) enhances tool life by 20%
- For titanium, inconel and steels (<40 RC
- Corner radius tolerance +/-0.001 in (+/-0.025 mm)
Specifications
TypeCenter Cutting High Performance Single End
SeriesV4R
Cutter Diameter1/4 in
Corner Radius0.015 in
Overall Length2-1/2 in
Length of Cut3/4 in
Number of Flutes4
Flute TypeSpiral
Shank Diameter1/4 in
Cutting DirectionRight Hand