Sandvik Coromant SANC 41201
Sandvik Coromant 6259630 CoroMill Plura Square Shoulder End Mill, 0.275 in Dia Cutter, 0.452 in Length of Cut, 4 Flutes, 0.314 in Dia Shank, 2.283 in OAL, PVD Coated
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill Plura, 0.275 in Diameter Cutter, 2.283 in Overall Length, 0.452 in Length of Cut, 4 Flutes, 0.314 in Shank Diameter, Right Hand Cutting Direction, 35 deg Helix Angle, Weldon Flat Shank, ANSI Code: 1P222-0700-XB 1630, ISO Code: 1P222-0700-XB 1630, Solid Carbide, PVD Coated
Features
- 1630 manufacturer grade
- 6.6 mm H shank
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- 30 deg body half taper
- Center cutting capability
- 4.55 mm Dia core at face
- 0.13 mm W corner chamfer
- 2 cutting length
- Without coolant entry
Specifications
ANSI Code1P222-0700-XB 1630
Cutter Diameter0.275 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle35 deg
ISO Code1P222-0700-XB 1630
Length of Cut0.452 in
MaterialSolid Carbide
Number of Flutes4
Overall Length2.283 in
SeriesCoroMill Plura
Shank Diameter0.314 in
Shank TypeWeldon Flat
TypeSquare