Sandvik Coromant SANC 40614
Sandvik Coromant 5963297 CoroMill Plura Ball Nose End Mill, 0.078 in Dia Cutter, 0.066 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 1.771 in OAL, PVD Coated
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill Plura, 0.078 in Diameter Cutter, 1.771 in Overall Length, 0.066 in Length of Cut, 2 Flutes, 0.236 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.42-02030-FC20G 1700, ISO Code: R216.42-02030-FC20G 1700, Solid Carbide, PVD Coated
Features
- 1700 manufacturer grade
- 1.92 mm Dia body
- 0 deg body half taper
- Straight chip breaker
- 6 mm L body
- 1 cutting length
- Without coolant entry
- No coolant exit
- 1.92 mm Dia neck
- SFW (EFW) feed direction
Specifications
ApplicationPre-Machining and Finishing
ANSI CodeR216.42-02030-FC20G 1700
Cutter Diameter0.078 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeR216.42-02030-FC20G 1700
Length of Cut0.066 in
MaterialSolid Carbide
Number of Flutes2
Overall Length1.771 in
SeriesCoroMill Plura
Shank Diameter0.236 in
Shank TypeCylindrical
TypeBall Nose