Sandvik Coromant SANC 25036
Sandvik Coromant 5743112 CoroMill Plura Square Shoulder End Mill, 0.236 in Dia Cutter, 0.511 in Length of Cut, 4 Flutes, 0.236 in Dia Shank, 2.244 in OAL, PVD Coated
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill Plura, 0.236 in Diameter Cutter, 2.244 in Overall Length, 0.511 in Length of Cut, 4 Flutes, 0.236 in Shank Diameter, Right Hand Cutting Direction, 50 deg Helix Angle, Weldon Flat Shank, ANSI Code: R216.34-06050-BC13P 1640, ISO Code: R216.34-06050-BC13P 1640, Solid Carbide, PVD Coated
Features
- 1640 manufacturer grade
- 4.8 mm H shank
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- VFD chip breaker
- Center cutting capability
- 3.15 mm Dia core at face
- 4.2 mm Dia core second flute
- 0.1 mm W corner chamfer
- L cutting length
Specifications
ANSI CodeR216.34-06050-BC13P 1640
Cutter Diameter0.236 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle50 deg
ISO CodeR216.34-06050-BC13P 1640
Length of Cut0.511 in
MaterialSolid Carbide
Number of Flutes4
Overall Length2.244 in
SeriesCoroMill Plura
Shank Diameter0.236 in
Shank TypeWeldon Flat
TypeSquare