Sandvik Coromant SANC 23254
Sandvik Coromant 5743022 CoroMill Plura Square Shoulder End Mill, 0.551 in Dia Cutter, 0.551 in Length of Cut, 2 Flutes, 0.551 in Dia Shank, 2.952 in OAL, PVD Coated
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill Plura, 0.551 in Diameter Cutter, 2.952 in Overall Length, 0.551 in Length of Cut, 2 Flutes, 0.551 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Weldon Flat Shank, ANSI Code: R216.12-14030-BS14P 1630, ISO Code: R216.12-14030-BS14P 1630, Solid Carbide, PVD Coated
Features
- 1630 manufacturer grade
- 12.7 mm H shank
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- Center cutting capability
- 7 mm Dia core at face
- 0.2 mm W corner chamfer
- M cutting length
- Without coolant entry
- No coolant exit
Specifications
ANSI CodeR216.12-14030-BS14P 1630
Cutter Diameter0.551 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeR216.12-14030-BS14P 1630
Length of Cut0.551 in
MaterialSolid Carbide
Number of Flutes2
Overall Length2.952 in
SeriesCoroMill Plura
Shank Diameter0.551 in
Shank TypeWeldon Flat
TypeSquare