Sandvik Coromant SANC 23175
Sandvik Coromant 5739620 CoroMill Plura Ball Nose End Mill, 1/4 in Dia Cutter, 1/4 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 4-1/2 in OAL, PVD Coated
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill Plura, 1/4 in Diameter Cutter, 4-1/2 in Overall Length, 1/4 in Length of Cut, 2 Flutes, 3/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: RA216.42-1630-AL06G 1620, ISO Code: RA216.42-1630-AL06G 1620, Solid Carbide, PVD Coated
Features
- 1620 manufacturer grade
- Cylindrical shank without clamping machine side adaptive interface
- 6.35 mm Dia body
- 2.5 deg body half taper
- Straight chip breaker
- 3.175 mm Dia core at face
- 45.3 mm L body
- 1 cutting length
- Without coolant entry
- No coolant exit
Specifications
ApplicationPre-Machining and Finishing
ANSI CodeRA216.42-1630-AL06G 1620
Cutter Diameter1/4 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeRA216.42-1630-AL06G 1620
Length of Cut1/4 in
MaterialSolid Carbide
Number of Flutes2
Overall Length4-1/2 in
SeriesCoroMill Plura
Shank Diameter3/8 in
Shank TypeCylindrical
TypeBall Nose