Sandvik Coromant SANC 19481
Sandvik Coromant 5743517 CoroMill Plura Ball Nose End Mill, 0.472 in Dia Cutter, 0.472 in Length of Cut, 2 Flutes, 0.629 in Dia Shank, 5.511 in OAL, PVD Coated
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill Plura, 0.472 in Cutter Dia, 5.511 in Overall Length, 0.472 in Length of Cut, 2 Flutes, 0.629 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: R216.42-12030-AP12G 1610, ISO Code: R216.42-12030-AP12G 1610, Solid Carbide, PVD Coated
Features
- 1610 manufacturer grade
- 2.5 deg body half taper
- Straight chip breaker
- 8.4 mm Dia core at face
- 1 cutting length
- Without coolant entry
- No coolant exit
- SFW (EFW) feed direction
- Right hand helix flute
- -5.5 deg radial rake
Specifications
ApplicationPre-Machining and Finishing
ANSI CodeR216.42-12030-AP12G 1610
Cutter Diameter0.472 in
Cutting DirectionRight Hand
FinishPVD Coated
Helix Angle30 deg
ISO CodeR216.42-12030-AP12G 1610
Length of Cut0.472 in
MaterialSolid Carbide
Number of Flutes2
Overall Length5.511 in
SeriesCoroMill Plura
Shank Diameter0.629 in
Shank TypeCylindrical
TypeBall Nose