Categories                              

Brands                              

  1. Home
  2. Paints, Equipment & Supplies
  3. Specialty Paints, Coatings & Additives
  4. Epoxy, Urethane & Specialty Coatings
  5. LOC 98383

Loctite LOC 98383

Loctite Nordbak 209824 PC 7226 2-Part Pneu-Wear, 3 lb Container, Liquid/Paste Form, Dark Gray/Tan, 740 sq-cm Coverage, 6 hr Curing

Invoice description: Nordbak Pneu Wear 3lb

UPC: 079340983830
UNSPSC: 31201710
Manufacturer PN: 209824
$211.70 EA
Factory Order
QTY:
 

Loctite Nordbak Pneu-Wear, 2-Part, Series: PC 7226, 3 lb, Kit, Liquid/Paste, Dark Gray/Tan, 740 sq-cm Coverage, Chemical Composition: Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Diethylenetriamine, 4,4-Isopropylidenediphenol, Amine Adduct, Amine Reacted Fatty Acid, Calcium Carbonate, Silicon Dioxide, Manganese Dioxide, Triethylenetetramine, Silane Derivative, Aliphatic Amine, 6 hr Curing, 250 deg F, <10 g/L VOC, Epoxy Part A/Ammoniacal Part B

  • Features

  • Recommended for rebuilding, repairing and protecting high wear areas under typical dry service temperatures
  • Trowelable
  • Filled with small ceramic beads and silicon carbide for maximum protection against fine particle abrasion
  • 4:1 mix ratio by volume/by weight
  • 30 min work life time
  • 15000 psi compressive strength
  • D 85 shore hardness
  • > 199.4 deg F flash point of part A and 399.2 deg F flash point of part B
  • 1.537 specific gravity od part B
  • Part A: epoxy resin; part B: epoxy hardener

Specifications

ApplicationPneumatic Conveying Systems, Repairing and Providing Abrasion Resistance In Elbows, Slurry Pumps, Hoppers, Cyclones and Dust Collectors
Chemical CompositionPart A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Diethylenetriamine, 4,4-Isopropylidenediphenol, Amine Adduct, Amine Reacted Fatty Acid, Calcium Carbonate, Silicon Dioxide, Manganese Dioxide, Triethylenetetramine, Silane Derivative, Aliphatic Amine
ColorDark Gray/Tan
Container Size3 lb
Container TypeKit
Coverage740 sq-cm
Curing Time6 hr
FormLiquid/Paste
Odor/ScentEpoxy Part A/Ammoniacal Part B
SeriesPC 7226
Temperature Rating250 deg F
Type2-Part
VOC Content<10 g/L

Additional Information

Standards/ApprovalOSHA 29 CFR 1910.1200|GHS Certified|ABS|CFIA Approved|NEHC Certified|Lloyds Certified
Country of OriginUS